V9:Material Thickness

Developer Note: The current V9 Rules can be found here.

The V9 Wiki is currently obsolete. The Project Phoenix Google Doc is the main source of V9 rules going forward.
We will eventually rebuild the wiki as a comprehensive rules reference, but now is not that time.

Thank you for your interest in the project! Join the Discord for more information!

- The Project Phoenix (V9) Development Team

This page is part of the V9 Development Project.

• These rules represent a proposed ruleset for the Amtgard LARP. All references to the organization are used from that perspective, and do not represent current organizational policy or procedures. Amtgard is a trademark of Amtgard International.
• This wiki is the detailed, comprehensive form of the ruleset. You can find the condensed Quick-Play rules here. These are currently still a work in progress.
• To view the current official Amtgard rules, please see the Amtgard V8 Rulebook.
  

---

Material Thickness

Certain armor styles may require materials that meet a specific thickness. Multiple layers of material may permanently affixed to each other to increase thickness however extra thickness caused by adhesives or empty space should not be factored into the new measurements.

• One bonus point may be awarded or deducted for Superior or Inferior thickness according to the chart below.
• Armor pieces that do not meet these minimum requirements may be judged as Ambiguous Armor as long as they still meet the universal equipment requirements.

MATERIAL THICKNESS REFERENCE CHART
	Inferior (Minimum)		Standard		Superior		Notes
Cloth	Cannot be less than standard		1/16" 1.60mm		1/8" 3.18mm
Light Leather	4oz 1/16" 1.60mm		6oz 3/32" 2.39mm		8oz 1/8" 3.18mm
Heavy Leather	Cannot be less than standard		10oz 5/32" 3.96mm		12oz 3/16" 4.78mm		Less than standard is Light Leather
Rigid, Non-Metal	1/8" 3.18mm		3/16" 4.78mm		1/4" 6.36mm		Material Density at least 0.9g/cm3 (equivalent to HDPE)
	Aluminum	Steel	Aluminum	Steel	Aluminum	Steel
Round Rings	18ga swg 16ga awg 0.048" 1.219mm	20ga swg 18ga awg 0.036" 0.914mm	16ga swg 14ga awg 0.064" 1.626mm	18ga swg 16ga awg 0.048" 1.219mm	14ga swg 12ga awg 0.080" 2.032mm	16ga swg 14ga awg 0.064" 1.626mm
Flat Rings	20ga swg 18ga awg 0.036" 0.914mm	22ga swg 20ga awg 0.028" 0.711mm	18ga swg 16ga awg 0.048" 1.219mm	20ga swg 18ga awg 0.036" 0.914mm	16ga swg 14ga awg 0.064" 1.626mm	18ga swg 16ga awg 0.048" 1.219mm	Measure along thinnest axis. Punched rings should be comparable thickness.
Sheet Metal	18ga 0.040" 1.024mm	20ga 0.036" 0.911mm	16ga 0.051" 1.291mm	18ga 0.048" 1.214mm	14ga 0.064" 1.628mm	16ga 0.060 1.518mm
Scales	20ga 0.032" 0.812mm	22ga 0.030" 0.759mm	18ga 0.040" 1.024mm	20ga 0.036" 0.911mm	16ga 0.051" 1.291mm	18ga 0.048" 1.214mm